![](http://pdfasset.owneriq.net/b/48/b4847b62-3f90-4323-8c8b-cd0242cc7c52/b4847b62-3f90-4323-8c8b-cd0242cc7c52-bg99.png)
Appendix C. NETGEAR VPN Configuration | 153
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
4. On Gateway B router menu, under VPN, select VPN Policies, and click the Edit button to
display the VPN - Auto Policy screen:
5. Test the VPN tunnel by pinging the remote network from a PC attached to Gateway A (N300
wireless modem router).
a. Open the command prompt (select Start > Run > cmd).
b. Type ping 172.23.9.
If the pings fail the first time, try the pings a second time.
N300 Wireless Modem Router with FQDN to Gateway B
This section is a case study on how to configure a VPN tunnel from a NETGEAR N300
wireless modem router to a gateway using a fully qualified domain name (FQDN) to resolve
the public address of one or both routers. This case study follows the VPN Consortium
interoperability profile guidelines (found at
http://www.vpnc.org/InteropProfiles/Interop-01.html).
Configuration Profile
The configuration in this section follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather the necessary information before you begin configuration.
toGW_A
toGW_A
14.15.16.17
172 23 9
10 5 6
1