NETGEAR DGND3300-100NAS Network Router User Manual


 
Appendix C. NETGEAR VPN Configuration | 165
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
To check the VPN connection, you can initiate a request from the remote PC to the VPN
router’s network by using the Connect option in the N300 wireless modem router screen:
Since the remote PC has a dynamically assigned WAN IP address, it must initiate the
request.
a. Right-click the system tray icon to open the pop-up menu.
b. Select Connect to open the My Connections list.
c. Select toDGND3300v2.
The N300 wireless modem router reports the results of the attempt to connect. Once the
connection is established, you can access resources of the network connected to the
VPN router.
To perform a ping test using this example, start from the remote PC:
a. Establish an Internet connection from the PC.
b. On the Windows taskbar, click the Start button, and then select Run.
c. Type ping -t 192.168.0.1, and then click OK.
Right-click the system
tray icon to open the
pop-up menu.
My Connections\DGD3300v2
Right-click the system
tray icon to open the
pop-up menu.
My Connections\DGD3300v2