Filter
Top Products
FS700TS Hardware Installation Guide
Physical Description 3-20
v1.0, September 2007
• Recessed default reset button to restore the device back to the factory defaults.
• Port LEDS
• System LEDs
Figure 3-2 illustrates the NETGEAR FS728TS Smart Switches back panel:
The back panel contains the following:
• A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for
accommodating the supplied power cord.
FS752TS Front and Back Panels
The NETGEAR FS752TS Smart Switch is a 48-Port 10/100M + 4-Port 10/100/1000M smart
stackable switch, with each RJ45 ports capable of sensing the line speed and negotiating the
operation duplex mode with the link partner automatically. Two SFP slots are also included for
SFP modules.
Figure 3-3 illustrates the NETGEAR FS752TS Smart Switch front panel:
The front panel contains the following:
• 48 RJ-45 connectors for 10/100 Ethernet switching ports.
• 4 RJ-45 connectors for 10BASE-T, 100Base-TX and 1000BASE-T.
• Two SFP slots for SFP modules supporting 1000(1000Base-SX/LX)/100M SFP.
• Reset button to restart the device.
• Recessed default reset button to restore the device back to the factory defaults.
• Port LEDS
Figure 3-2
Figure 3-3