NETGEAR FS 726 Switch User Manual


 
2-3physical description
Figure 2-2. Front and Back Panels of the FS750 Switch
10/100 Mbps RJ-45 Ports
As Figures 2-1 and 2-2 show, the FS726 Switch has 24 RJ-45 ports, while the FS750
Switch has 48 RJ-45 ports.These are auto-sensing 10/100 Mbps ports: when you
insert a cable into an RJ-45 port, the switch automatically detects the maximum speed
(10 or 100 Mbps) and duplex mode (half- or full-duplex) of the attached device, and
displays this information using the front panel 100 Mbps and FDX LEDs for that port
(LEDs are described in the next section).The 10/100 Mbps ports support only unshield-
ed twisted-pair (UTP) cable terminated with an 8-pin RJ-45 plug.
10/100 Mbps
ports
Front Panel of the Model FS750 Switch
Rear Panel of the Model FS750 Switch
Module Bays
LED Mode
Button
Reset
Button
Power
LED
Link LEDs
Mode LEDs