Filter
Top Products
GS700AT Series Smart Switch Software Administration Manual
5-4 Configuring QoS
v1.0, March 2008
To configure CoS interface parameters:
1. Click QoS > CoS > Basic > CoS Interface Configuration. The CoS Interface Configuration
screen displays:
The CoS Interface Configuration screen contains the following:
• Interface – Displays the interface for which the default CoS parameters are defined.
• Default CoS – Select the default CoS value for incoming packets to the selected interface
for which a VLAN priority (VPT) is not defined.
• Restore Defaults – Restore the factory CoS default settings to the selected interface. The
possible field values are:
– Checked – Restore the factory CoS default settings to the ports.
– Unchecked – Maintain the current CoS settings.
2. Select the interface.
3. Select the Default CoS value from the list in the provided field in the first row.
4. Check or uncheck the Restore Defaults box in the interface entry row.
5. Click Apply to update the device.
Figure 5-2