Filter
Top Products
GS700AT Series Smart Switch Software Administration Manual
1-6 Getting Started with Switch Management
v1.0, March 2008
6. Click Configuration Setting. A screen similar to that shown below appears.
7. Select Disable to disable DHCP.
8. The default IP address is 192.168.0.239 and the default subnet mask is 255.255.255.0. If you
want different values, enter the switch IP address, gateway IP address and subnet mask.
9. Type your password and click Set. Please ensure that your PC and the GS700AT Gigabit
Smart Switch are in the same subnet. Note the settings for later use.
Figure 1-3