NETGEAR GS700AT Series Switch User Manual


 
GS700AT Series Smart Switch Software Administration Manual
Introduction to the Web Browser Interface 2-9
v1.0, March 2008
To mark or unmark all ports:
1. Click on the quick box that appears to the left of the Port gold button. A T appears in the
quick box. This sets all ports as Tagged.
2. Click on the Port gold button to display the ports, which are now all Tagged.
3. Click again on the Port quick box, and a U appears in the quick box and in all the port boxes,
marking the ports as untagged.
4. Click again on the quick box, and the quick box and all the port boxes appear blank, marking
the ports as neither tagged nor untagged.
Figure 2-11
Figure 2-12
Figure 2-13