Filter
Top Products
GS700AT Series Smart Switch Software Administration Manual
Configuring QoS 5-5
v1.0, March 2008
Queue
The Queue screen contains fields for defining the QoS queue forwarding types.
To set the queue settings:
1. Click QoS > CoS > Basic > Queue. The Queue screen displays:
The Queue screen contains the following fields:
• Strict Priority – Select to specify traffic scheduling based strictly on the queue priority.
• WRR – Select to assign WRR weights to queues. The queue weights are preconfigured
and are set to 1, 2, 4 and 8.
2. Select either Strict Priority or WRR to specify the traffic scheduling method.
3. Click Apply to update the device.
Bandwidth
After packets are assigned to a queue, a scheduling scheme can be assigned to an interface, using
either:
• Committed Burst Size – Indicates the maximum number of data bits transmitted within a
specific time interval.
• Committed Information Rate – Indicates the rate that data is transmitted. The rate is
averaged over a minimum time increment.
The Bandwidth screen allows the user to define Ingress Rate Limit and Egress Shaping Rates.
Figure 5-3