Filter
Top Products
HDX111 Powerline HD Plus Ethernet Adapter User Manual
1-2 Installing and Using the Powerline HD Plus Ethernet Adapter
v1.1, March 2008
Physical Features
The HDX111 contains two buttons, three status lights, and an Ethernet port.
The following table describes these physical features.
Figure 1-1
Table 1-1. HDX111
Physical Features
Item Description
1. Pass-through AC
outlet
For best Powerline performance, connect adjacent electrical appliances of up to
15A directly to the pass-through AC outlet. The outlet filters out noise that affects
Powerline performance.
2. Standby button Turn Standby mode on or off. See “Standby Mode” on page 1-8.
3. Security button Set up Powerline security or reset to factory default settings:
• To configure security, see “Securing Your Powerline Network” on page 1-7”.
• To reset to factory default settings, press for about 12 seconds, until the Status
light (5) goes off.
4. AP light Indicates the Powerline security access point and security configuration (see
“Securing Your Powerline Network” on page 1-7”):
• Blinking orange indicates that security is being configured.
• Solid orange on indicates that the Powerline HD Ethernet adapter is configured as
the Powerline security access point.
2.
3.
4.
5.
6.
7.
1.