Filter
Top Products
System Configuration
12
ProSafe Plus Switch Utility
The switch selection remains in effect until you select a different switch, or quit the utility.
System features are:
Status. Indicates which switches are present and if they are operational.
Maintenance. Allows you to change administrator password, reboot the switch, reset to
factory default settings and if supported by the selected switch, upgrade switch firmware.
Monitoring. Displays port statistics (packets sent or received), tests cable connections, and
allows you to mirror ports.
MultiCast. Allows you to change the IGMP snooping settings.
LAG. Allows you to enable or disable LAG (Link Aggregation Group)
.
Table 1. Features Available on the System Tab
Feature Description
Status
Switch Selection Selects a switch to configure
Switch Information Displays general information for the selected switch
Maintenance
Change Password Changes password for the selected switch
Device Reboot Restarts the selected switch using configured settings
Factory Default Restarts the selected switch with factory default settings
Firmware Upgrade Updates the selected switch with a firmware update saved on the
computer
Monitoring
Port Statistics Displays port network traffic for the selected switch
Mirroring Allows a port to receive data sent to another port
Cable Tester Checks cable connections for the ports of the selected switch
MultiCast
IGMP snooping Allows switch to selectively forward multicast traffic
LAG Allow multiple Ethernet links to be combined to a single logical link. Only
the JGS524E switch supports LAG.