Filter
Top Products
System Configuration
19
ProSafe Plus Switch Utility
Static LAG (Link Aggregation Group) for JGS524E Only
LAGs allow you to combine multiple Ethernet links to a single logical link. Network devices
treat the aggregation as if it were a single link, which increases fault tolerance and load
sharing. Configure the LAG members before you enable the LAG.
To enable or disable a LAG:
1. Select System > LAG > LAG Configuration.
2. Select the LAG ID that you want to configure.
3. In the Admin Mode field, select Enable or Disable.
4. Click Apply.
To add ports to be LAG members
1. Select System > LAG > LAG Membership.
2. Go to LAG ID and select the LAG ID you want to configure.
3. Select the ports that you want to be the LAG ID member ports.
4. Click Apply.