Filter
Top Products
Virtual LAN Configuration
22
ProSafe Plus Switch Utility
802.1Q Based Configuration
802.1Q VLAN configuration can be done using basic or advanced methods.
Basic 802.1Q VLAN Configuration
In Basic 802.1Q VLAN configuration you configure ports to a VLAN Group ID (1-4093 or all).
To configure ports using 802.1Q criteria:
1. Select the switch.
2. Select VLAN. This displays the Port-Based VLAN configuration screen.
3. Select 802.1Q on the menu.
4. Select Enable.
5. For each port to be configured, enter the VLAN Group ID (1-4093 or all) in the field below
the port.
6. When you are finished configuring ports, click Apply.
Advanced 802.1Q VLAN Configuration
In Advanced 802.1Q VLAN configuration you configure ports to a VLAN Group ID (1-4093 or
all). The advanced configuration feature allows you to create and update VLAN groups with
additional information.
VLAN Configuration
The VLAN Configuration feature lists the currently defined VLANs and the ports assigned to
each.
To add VLAN groups:
In the VLAN ID field at the bottom right of the screen, enter the VLAN ID (1-4094) for the
VLAN you want to configure and click Add. The new VLAN group is displayed in the
VLAN ID column.
7. After you have created a new VLAN ID click VLAN Membership to add ports to the group.
See
VLAN Membership on page 23.
To delete a VLAN group:
1. Select the check boxes for the VLANs to be deleted. Selecting the check box at the top
of the column selects all VLAN IDs.
2. Click Delete. The selected VLAN groups are deleted.