Filter
Top Products
Supplemental Information
34
ProSafe Plus Switch Utility
Default Settings
All ProSafe Plus switch features have default settings You do not need to configure any
settings to use the ProSafe Plus switches The following table lists the default values for
switch settings Shaded features are not configurable on all switches
Table 3. Default Switch Settings
Tab Menu Feature Default Value
System Status Switch Selection No switch selected
Names All names blank
Passwords “password” for all switches
Switch Information
DHCP Mode Enabled
IP Address 192.168.0.239
Subnet Mask 255.255.255.0
Gateway Address 192.168.0.254
Maintenance
Change Password All fields blank
Device Reboot Unchecked
Factory Default Unchecked
Firmware Upgrade Filename blank
Monitoring
Port Statistics 0
Mirroring Disabled
Cable Tester OK or No Cable for each port
MultiCast
IGMP Snooping Status Enabled
VLAN ID Enabled for IGMP
Snooping
1 (not configurable until VLAN is enabled)
Validate IGMPv3 IP header Disabled
Block Unknown Multicast
Address
Enabled
IGMP Snooping Static Router
Port (GS105E only)
N/A (blank)