NETGEAR READYNAS 316 Switch User Manual


 
LUNs
109
ReadyNAS OS 6.1
A pop-up screen displays.
3. Configure the settings as explained in the following table:
Item Description
Name The name is provided for information only and cannot be changed.
Target The target is the address that an iSCSI client (that is, an initiator) needs to access the
LUN group.
The Target field is automatically populated, but you can delete the content
and then replace the content with a custom target address.
Require initiators
to identify
themselves using
CHAP
Select this check box to enable CHAP authentication and to allow only authenticated
initiators access to the LUN group. By default, access to the LUN group is open to the
initiators that you add to list of initiators (see Add an iSCSI Initiator on page 110).
Allowed Initiators Select one of the following radio buttons:
Any.
Access to the LUN group is granted to all initiators that have information
about the target address. (If CHAP authentication is enabled, access is dependent
on CHAP authentication.)
Selected.
Access to the LUN group is granted to iSCSI qualified names (IQNs)
only. (If CHAP authentication is enabled, access is dependent on CHAP
authentication.)
For more information about configuring iSCSI initiators, see the following sections:
Add an iSCSI Initiator on page 110
Remove an iSCSI Initiator on page 112
Edit the CHAP Password on page 113