Filter
Top Products
Shared Folders
52
ReadyNAS OS 6.1
The indicator on the protocol button turns green.
Note: When you enable a file-sharing protocol for an individual shared folder,
the protocol is also enabled globally. For more information about global
settings, see Configure Global Settings for File-Sharing Protocols on page 192.
• T
o save the configured access settings but prevent them from taking effect, set the
On-Off slider so that the slider shows the Off position.
The indicator on the protocol button turns gray.
Note: When you disable a file-sharing protocol for an individual shared folder,
the protocol remains enabled globally so that you can still access other folders
that might be using the protocol. For more information about global settings,
see Configure Global Settings for File-Sharing Protocols on page 192.
8. Click the Apply button.
9. Click the OK button.
Your changes are saved and the pop-up screen closes.
Configure User and Group Settings
For SMB, AFP, FTP, and HTTP, you can configure access rights to an individual shared folder
for users and groups. User and group settings do not apply to NFS and Rsync.
Note: You cannot configure access rights for the ReadyNAS admin ( ) or
for Cloud users (
). For more information about Cloud users, see
Access Shared Folders Using Cloud Services on page 68.
To configure user and group network access settings:
1. On the folder settings pop-up screen, click the Network Access tab.
2. Select one of the file-sharing protocol buttons:
• SMB
• AFP
• FTP
• HTTP
The screen adjusts to display the access properties for the selected protocol.