Filter
Top Products
Reference Manual for the Model RP614 v2 Web Safe Router
Connecting the Router to the Internet 2-5
c.
Connect the Ethernet cable from your cable or DSL modem to the Internet port (A) on the
Model RP614 v2.
Figure 2-2: Connect the cable or DSL Modem to the router
d.
Connect the Ethernet cable which came with the router from a Local port on the router (B)
to your computer.
Figure 2-3: Connect the computers on your network to the router
Note: The RP614 v2 router incorporates Auto Uplink
TM
technology. Each Ethernet port
will automatically sense if the cable should have a normal connection or an uplink
connection. This feature eliminates the need to worry about crossover cables because Auto
Uplink will make the right connection either type of cable.
e. Now, turn on your computer. If software usually logs you in to your Internet connection,
do not run that software or cancel it if it starts automatically.
Cable/DSLWebSafeRouter RP614
Cable
orDSLmodem
A
Cable/DSLWebSafeRouter RP614
Cableor
DSLmodem
B