Filter
Top Products
10003137.00 Rev.1
2-2 Installing PAP
Installing PAP
PAP can be used to monitor traffic on either a local or a remote PrimeSwitch.
Local
To monitor local traffic connect the PC to the PrimeSwitch PAP connector, as in the
following diagram:
Figure 2: Local connection
Remote via ADLM
To monitor remote traffic, a V.24 ADLM must be installed in both the local and remote
PrimeSwitches. Connect the PAP connector to an ADLM V.24 port on the remote
PrimeSwitch, and connect the PC to an ADLM V.24 port on a local PrimeSwitch, as in
Figure 3:
Figure 3: Remote connection
PC
PrimeSwitch
PA P
Local PrimeSwitch
Remote PrimeSwitch
ISDN
PC
ADLM
ADLM
PA P