Filter
Top Products
Setting the GigaStor’s IP address
Chapter 2 Installing Your GigaStor
21
rev. 1
Figure 3 Probe Service Configuration Applet
10 The Probe Administration window opens. Click the Probe
Options tab (Figure 4).
Figure 4 Probe Options
11 Change the name of the probe to something meaningful to you.
The name might be the physical location of the probe. Click
Apply to save your changes and close the window.
By default the GigaStor runs the Expert Probe as a Windows
service and starts automatically at system startup. This prevents
you from using the Observer console on the GigaStor. You must
connect to the GigaStor using Observer on a different system. If
you want to use the Observer console locally, see “Using the
Observer console locally on the GigaStor” on page 108.