Filter
Top Products
15
Shutdown
1. Press Power to turn the projector off.
2. The Power indicator light flashes green and the lamp shuts down. The fans continue to run for
approximately 45 seconds to cool down the projector.
λ To protect the lamp, the projector will not respond to any commands during the cooling process.
λ To shorten the cooling time, you can also activate the Quick Cooling function.
3. Switch off the main Power at the left side and disconnect the power cord at the adaptor from the wall
socket.
λ Do not unplug the adaptor or power cord before the projector shutdown sequence is complete, or
during the 45-second cooling down process.
λ If the projector is not properly shut down, you risk damaging the lamp. Do not move the projector while
the lamp is hot.