Filter
Top Products
4
Important Safety Instructions
λ Operate the unit on 100–240 V AC, 50/60 Hz to DC 12V 7A power adaptor.
λ Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified
personnel before operating it further.
λ Unplug the unit from the wall outlet or set the power switch to the OFF position if it is not to be used for
several days.
λ To disconnect the cord, pull it out by the plug. Never pull the cord itself.
λ The wall outlet should be near the unit and easily accessible.
λ The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall
outlet with the power switch set to the OFF position.
λ Do not look into the lens while the lamp is on.
λ Do not place your hand or objects near the ventilation holes. The air coming out is hot.
λ Avoid using an extension cord with a low voltage limit, as it may cause short-circuiting and physical
injury.
λ Do not catch your finger between the unit and surface of the floor when moving the projector installed
on the floor.
λ Be careful not to catch your finger in the cooling fan.