Filter
Top Products
9
3. Setup
Nikon
LS-30 35 mm Film Scanner User’s Guide
• Should the insulation become damaged and the wires become
exposed, contact your retailer or Nikon service office for
replacement. Continued use could cause fire or electric shock.
• Do not handle the cable when your hands are wet. Doing so
could cause electric shock.
• The outlet into which the power cable is plugged must be grounded.
Failure to ground the power supply could result in electric shock.
• The scanner and all devices to which it is connected must be
connected to a common ground. If a common ground is not used,
a ground loop could occur, causing electric shock or static “noise.”
•
Do not plug the power cord into
an extension cord or multiple-
outlet extension, as this could
result in fire or malfunction.
• Use an independent outlet whenever possible. If the scanner is
plugged into an outlet to which a household appliance such as a
vacuum cleaner or air-conditioner is connected, the scanner’s
power supply may be subject to noise.
• Unplug the power cable by
pulling on the plug, not on the
cable itself. Pulling directly
on the cord could result in
damage that could cause fire or
electric shock.
The shape of the cable
depends on the country of sale
• Do not connect or disconnect the cable while the power is on.