Filter
Top Products
19
3. Setup
Nikon
LS-30 35 mm Film Scanner User’s Guide
Windows
At start-up, Windows will detect the LS-
30 and display the dialog shown at left.
Insert the Nikon Scan CD in the computer’s
CD-ROM drive, confirm that the Driver
from disk provided by hardware
manufacturer radio button is selected,
and click OK. When the “Install from
Disk” dialog appears, enter the drive
letter of the CD-ROM drive in the Copy
manufacturer’s files from textbox
and click OK. Windows will then
register your scanner on the system.
Once the scanner has been registered, the Welcome dialog for the
Nikon Scan installer will appear on the desktop (the Welcome
dialog differs slightly depending on where your scanner was
purchased; see the reference manual for details).
Click Nikon Scan 2.1. You will be prompted to choose a lan-
guage for Nikon Scan’s menus and dialogs. Installation can now be
completed by following the instructions provided by the installer
(see the Nikon Scan for Windows Reference Manual for details).