Filter
Top Products
User’ Guide
49
NAT : Enable
WAN SETUP :
NAT public IP configuration : Automatically
NAT public IP address : 68.101.124.67 Subnet Mask : 255.255.255.0
NAT public Gateway IP address : 68.101.124.1
LAN SETUP :
Sub Ethernet interface IP address 192.168.100.1 subnet-mask 255.255.255.0
DHCP Server Pool Table :
DHCP server support 512 IP, Created 20 IP
Pool Index Begin IP End IP
1 192.168.100.1 192.168.100.21
Provision assigned DNS 68.4.16.25
Provision assigned DNS 68.2.16.30
Provision assigned DNS 68.6.16.30
DHCP server lease time : 1800
IP Mapping Table:
Index Global IP Local IP
1 64.168.39.3 192.168.100.4
¾ nat static ipmapping delete {index/all}
Remove NAT one to one mapping entry from the IP Mapping Table
index: The index number IP Mapping Table (see “show nat config”command )
Port forwarding setting
¾ nat static portmapping add {port }{ private ipaddress} {tcp|udp}
Set NAT/PAT Port forwarding table
Example:
CM>nat static portmapping add 21 192.168.100.23 tcp
CM>show nat config
NAT : Enable
WAN SETUP :
NAT public IP configuration : Manually
Static NAT public IP address : 68.5.203.15 Subnet Mask : 255.255.254.0
Static NAT public Gateway IP address : 68.5.202.1
LAN SETUP :
Ethernet interface IP address 192.168.100.1 subnet-mask 255.255.255.224
NAT DHCP Server Pool Table :
NAT DHCP server support
NAT DHCP server support 512 IP, Created 20 IP
Pool Index Begin IP End IP