Filter
Top Products
User’ Guide
60
Routing mode
¾ ip route enable
Default setting for routing mode is RIPv2 with DHCP disabled automatically.
Example:
RIPv2 with MD5 authenication mode enable, key-string “abcdefg”
Public subnet 24.30.206.0/29
• (5) Static Public IPs 24.30.206.2~24.30.206.6
• Gateway IP address 24.30.206.1
Telnet commands:
CM>interface ethernet address 24.30.206.1 mask 255.255.255.248
CM>interface cable rip key-chain 1
CM>interface cable rip auth-mode md5
CM>rip key-chain 1 1 key-string abcdefg
CM>ip route enable
CM>reset