Filter
Top Products
User’ Guide
55
Enable/disable silence mode. If set, the cable router just listen RIP message, it doesn’t send any
RIP message out.
¾ rip key-chain {1| 2}{0..32767} key-string {a..z|A..Z|0..9}
Set RIP authentication key string for key-chain & Key ID
key-chain number: select key-chain1 or key-chain2
key-id: Key ID number, range between 0..32767.
key-string: Key content, the key length must not exceed 16 bytes.
Example:
CM>rip key-chain 1 1 key-string abcdefg
Set key-chain 1, key ID 1, with key string to “abcdefg”
¾ rip key-chain {1|2}{ 0..32767} start-time {yyyy-mm-dd}{hh:mm:ss}
Set RIP authentication start time for key-chain specified.
Example:
CM>rip key-chain 1 1 start-time 2002-04-20 15:30:00
Set key-chain 1, key ID 1, with start time to 2003/04/20 15:30:00
¾ rip key-chain {1|2}{1..32767} expire-time [{yyyy-mm-dd}{hh:mm:ss}|infinite]
Set key expire time, default value is infinite.
Example:
CM>rip key-chain 1 1 expire-time 2002-06-01 18:00:00
Set expire time at 2003-06-01 18:00:00
¾ rip key-chain {1|2}{1..32767} delete
Delete a key from specified key-chain and key ID.
¾ rip default
Set all RIP parameters to default.
Web-access
¾ web-access cpe {enable|disable}