Filter
Top Products
Synchronizing data using the Nokia 9300i
15
Copyright © 2005 Nokia. All rights reserved.
Synchronizing data using the Nokia 9300i
Select Desk→ Tools→ Sync.
To synchronize data using the Nokia 9300i, do the
following:
1 Edit the synchronization profile to fit your needs. Note
that if you are using the PC Suite profile, you do not
need to edit it to start data synchronization.
See “Editing a synchronization profile” on page 12.
If you using a data cable, select Tools
→ Control panel→
Connections
→ Cable setup, and make sure that the Data
cable mode is either PC Suite connection or IP Passthrough
overrides PC Suite.
2 Connect your device to a compatible PC. You can use a
Bluetooth, an infrared, or a data cable connection.
3 Press Sync. Note that if you are using the PC Suite
profile, a Bluetooth connection can be used but the
synchronization must always be initiated from the PC.
If you use Bluetooth, the device searches for available
devices for synchronization. To end the search, press
Stop. Press Select to select the device with which you
want to synchronize.
If you use infrared or data cable, synchronization starts
automatically when a connection is established.
After you have synchronized your device with a computer,
you can view the synchronization log. To open the
synchronization log, select a profile and press Log.
The log shows, for example, the date and time of the
transfer. If errors occur during the synchronization profile,
a dialog screen automatically appears. Select Show log to
view the log.
You may receive the synchronization settings as a smart
message from your service provider.