Filter
Top Products
Electromagnetic interference compliance 19
Electromagnetic interference compliance
WARNING
Risk of electromagnetic radiation exposure
Use of controls or adjustments, or performance of procedures
other than those specified herein can result in hazardous radiation
exposure.
The products described in this guide meet requirements of:
FCC Part 15, Subparts A and B, Class A
EN55022: 1998/CISPR22:1997), Class A
General License VDE 0871, Class B
(AmtsblVfg No. 243/1991, Vfg 46/1992) VCCI Class A ITE
EN55024:1998/CISPR24:1997
Federal Communications Commission (FCC) Compliance Notice: Radio
Frequency Notice
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy. If
it is not installed and used in accordance with the instruction manual, it
may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference,
in which case users will be required to take whatever measures may be
necessary to correct the interference at their own expense.
European EN 55 022 statement
This is to certify that the Nortel Networks optical routing system is
shielded against the generation of radio interference in accordance with
the application of Council Directive 89/336/EEC, Article 4a. Conformity is
declared by the application of EN 55 022 Class A (CISPR 22).
CAUTION
Risk of radio interference
This is a Class A product. In a domestic environment, this product
may cause radio interference, in which case, the user may be
required to take appropriate measures.
Nortel Metro Ethernet Routing Switch 8600
Installation — SFP, XFP, and GBIC Hardware Components
NN46220-301 02.04 Standard
4.2 14 February 2008
Copyright © 2008, Nortel Networks
.