Filter
Top Products
32 Gigabit interface converters
4
Use the following job aids to determine the appropriate GBIC for
your application.
—End—
Procedure job aid: GBIC models
GBICs are hot-swappable input/output enhancement components designed
for use with Nortel products to allow Gigabit Ethernet ports to link with
other Gigabit Ethernet ports over various media types. The following table
describes supported GBICs. For specifications for these GBICs, see "GBIC
specifications" (page 55).
ATTENTION
Attainable cable length can vary depending on the quality of the fiber optic cable
used.
Table 4
GBIC models
Model and connector Product number Description
1000BASE-T (RJ-45) AA1419041-E5 CAT5 unshielded twisted pair (UTP), up to 100 m
1000BASE-SX (SC) AA1419001-E5 850 nanometers (nm), up to 275 or 550 m
1000BASE-LX (SC) AA1419002-E5 1310 nm, up to 10 km
1000BASE-XD (SC) AA1419003-E5 1550 nm, up to 50 km
1000BASE-ZX (SC) AA1419004-E5 1550 nm, up to 70 km
1000BASE-EX CWDM
(SC)
AA1419017-E5 to
AA1419024-E5
1470 nm to 1610 nm, up to 120 km
Installing a GBIC
Install a GBIC to complete the transmission path.
Installing a GBIC takes about 3 minutes.
Prerequisites
•
Verify that the GBIC is the correct model for your network configuration.
Nortel Metro Ethernet Routing Switch 8600
Installation — SFP, XFP, and GBIC Hardware Components
NN46220-301 02.04 Standard
4.2 14 February 2008
Copyright © 2008, Nortel Networks
.