Filter
Top Products
893-00945-A 1
Introduction
This publication explains how to upgrade the firmware in a BayStack
100-series hub using the BayStack 100-series Hub Revision C Firmware
Upgrade Kit.
Revision C firmware for the BayStack 100-series hubs was fully implemented
across all BayStack 100-series hubs after November 15, 1996. This firmware
provides the following additional features and support for 100-series hubs:
• Compatibility with the BayStack 100-series redundant fiber media adapter
(10BASE-FL RDN Media Adapter)
• Bay Networks
™
BaySecure
™
LAN Access network security features
• More seamless operating environment between hubs in a stack
If these features would be useful to your network, and you have BayStack hubs
that were purchased before November 15, 1996, refer to one of these two
documents to determine if your hub requires an upgrade to revision C
firmware:
•
Release Notes for the BayStack 100-series Redundant Fiber Media
Adapter
(Bay Networks part number 896-126-A)
•
Release Notes for the BayStack 100-series Hubs
(Bay Networks part
number 896-086-A)
Additional firmware upgrade kits are available through your Bay Networks
distributor or authorized reseller. When contacting your distributor or reseller,
order the BayStack 100-series Hub Revision C Firmware Upgrade Kit (Bay
Networks part number CG1011001).