Filter
Top Products
Firmware Upgrade Instructions for the BayStack 100-series Hubs
2 893-00945-A
Package Contents
This firmware upgrade kit contains the following items:
• Programmable read-only memory (PROM) chip
• These upgrade instructions
Required Tools and Materials
To replace the 100-series hub firmware, you need the following tools:
• A #1 Phillips screwdriver to remove the cover from the 100-series hub
• An industry-approved IC extraction tool or equivalent to extract the
PROM from its socket on the 100-series hub motherboard
• An antistatic mat and wrist strap (attached to an antistatic leash) to protect
electronic components from static electricity damage
• The guide
Using the BayStack 100-series Hubs
(Bay Networks part
number 893-839-C or later) to refer to procedures on installing and
removing the hub