Filter
Top Products
29
Nortel WLAN - Security Switch 2300 Series Quick Start Guide
13 Click Done.
End
Opening WMS
To open a new installation of WMS for the first time, complete the following steps:
Step Action
1 Double-click the WMS icon on your desktop.
The License Information dialog appears, asking for the Serial Number and License
key. See “Gathering required information” on page 14 for more information about these
fields.
2 Specify the WMS serial number and license key.
3 Click OK.
WMS confirms the serial number and license key, and displays a dialog box to
showing:
• the running software is a licensed copy
• which host(s) the license is valid for
• how many APs can be managed
4 Click OK to close the License Information dialog box.
The WMS Services Connection screen appears.
5 Specify values for the WMS Services Connection fields, as described in Table 7
6 Click Next to generate a certificate using the license key.
The Certificate Check screen appears, and displays the new certificate. Select
Always accept self-signed certificates to skip this certificate check in the future.
Table 7: WMS Services Connection fields
Field Description
Address Specifies the IP address of the WMS server.
Use the loopback IP address (127.0.0.1) if the client and server are
installed on the same machine.
Port Specifies the connection port used.
Accept the default value.