Filter
Top Products
Installation and Reference for the BayStack 60-12T/60-24T 10/100 Ethernet Hubs
2-4
206378-A
Figure 2-3 shows the specific ports used to connect two hubs, as in the expanded
network in Figure 2-2
. Port 1 on the top hub is set to MDI (uplink) with the MDI/
MDI-X button. A UTP/STP Ethernet cable connects port 1 of the top hub to
another non-MDI port on the second hub. This type of connection is known as
“daisy-chaining.”
Figure 2-3. Daisy-Chained Hubs
Bridging
The internal switching hardware of the hub bridges the two collision domains, the
10 Mb/s and 100 Mb/s segments. The switching hardware handles the bridging,
which allows 10 Mb/s and 100 Mb/s segments to talk to each other.
9336EA
208-24T Hub
208-24T Hub
Set
to MDI