Filter
Top Products
Installation and Reference for the BayStack 60-12T/60-24T 10/100 Ethernet Hubs
3-6
206378-A
Verifying Port Status
You can check the status of each cable connection by viewing the port status
indicators shown in Figure 3-2
and described in Table 3-3.
Figure 3-2. Port Status LEDs
Table 3-3 describes the light and color indications of port status LEDs.
Table 3-3. Port Status LED Descriptions
LED State Indication
Power On (green) The hub is receiving power.
Collision Flashing (yellow) A packet collision occurred in the 10/100 Mb/s domain.
Activity Flashing (green) The port is receiving 10/100 Mb/s traffic.
Partition On (yellow) The port has been partitioned from the network.
Link 10/100M On (green) The port has established a valid 100 Mb/s network connection.
On (yellow) The port has established a valid 10 Mb/s network connection.
9247EA
60-24T Hu
135791113
10/100 Link/Activity
Partition
10/100 Link/Activity
Partition
15 17 19 21 23
1 4 6 8 10 12 14 16 18 20 22 24
24
23
60-12T Hu
1334567
10/100 Link/Activity
Partition
8
9101112
12
60-24T Hub
1
10M
100M
Collision
Power On
35
Utlization %
10 2040>
MDIX/MDI
135791113
10/100 Link/Activity
Partition
10/100 Link/Activity
Partition
15 17 1921 23
1 4 6 8 10 1214 16 1820 22 24
1257911
2 4 6 8 10 12
14 16 18 20 22 24
13 15 17 19 21 23
60-12T Hub
1
10M
100M
Collision
Power On
35
Utlization %
10 2040>
MDIX/MDI
1334567
10/100 Link/Activity
Partition
8
9101112
123456 789101112