Filter
Top Products
73
Installing Metro Ethernet Routing
Switch 8600 modules and connecting
equipment
This chapter provides instructions for installing and connecting Metro
Ethernet Routing Switch 8600 modules in an Ethernet Routing Switch 8000
Series chassis to create a Metro Ethernet Routing Switch 8600.
Navigation
•
"Removing a filler panel" (page 73)
•
"Installing a filler panel" (page 75)
•
"Installing and replacing a module" (page 75)
•
"Connecting a PC or terminal to the switch" (page 86)
•
"Connecting a modem to the switch" (page 86)
•
"Connecting a network management station to the switch" (page 88)
•
"Connecting communications cables to Metro Ethernet Routing Switch
8600 modules" (page 89)
•
"Managing cables for the Ethernet Routing Switch 8000 Series chassis"
(page 93)
• "Initializing the 8672ATME, 8672ATMM, and 8683POSM modules"
(page 96)
Removing a filler panel
Remove a filler panel so that you can install a new module.
Nortel ships the 8000 Series chassis with a filler panel covering each empty
module slot.
On a 8003, 8006, or 8010 chassis, the filler panel covers an empty module
slot. On the 8010co chassis, the filler panel resembles a module and is
installed in the empty module slot.
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Copyright © 2005-2007, Nortel Networks
.