Filter
Top Products
78 Installing Metro Ethernet Routing Switch 8600 modules and connecting equipment
For a CPU module, the online LED will be off or amber when the
CPU module is disabled.
4
Disconnect any cables attached to the ports on the module.
CAUTION
Do not operate the Metro Ethernet Routing Switch 8600
with an empty module slot. If you need to replace a failed
module and you do not yet have a replacement module,
leave the failed module installed or install a filler panel.
5
Using a Phillips screwdriver, loosen the two captive screws that
secure the module to the chassis ("Loosening screws on the module:
8003, 8006, and 8010 chassis" (page 78) or "Loosening screws on
the module: 8010co chassis" (page 79)).
Loosening screws on the module: 8003, 8006, and 8010 chassis
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Copyright © 2005-2007, Nortel Networks
.