Filter
Top Products
8681XLW module 55
"8681XLW module LEDs" (page 55)shows the location of the 8681XLW
module LEDs.
Unlike other 8600 modules, the TX LED for the 8681XLR and 8681XLW
modules is located below the RX LED.
8681XLW module LEDs
"8681XLW module LEDs" (page 55) describes the 8681XLW module LEDs.
8681XLW module LEDs
Type Label
Color/State
Meaning
Green/Blinking The port is transmitting data.
Green/Steady The port is enabled but not
transmitting data.
TX
Off The port did not detect a fault
condition.
Green/Steady The port has a link and is enabled.
Green/Blinking The port is receiving data.
Port
RX
Amber/Steady The cable is disconnected, the port
is disabled, the link is down, or
SONET errors are detected.
Green/Steady The module has completed its
power-on self-test and software
initialization and is operating
normally.
Amber/Steady The module slot is disabled.
Module Online
Off The switch power is off. If the
switch power is on, the module
is going through its power-on
self-test and software initialization.
A module in this state is not yet
functional.
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Copyright © 2005-2007, Nortel Networks
.