Filter
Top Products
Installing and replacing a module 85
Securing the module in the chassis: 8003, 8006, and 8010 chassis
Securing the module in the chassis: 8010co chassis
8
If the slot is disabled, the new module does not automatically boot.
Enable the slot by using the following command:
conf slot <slotnum> state enable
<slotnum> specifies the number of the slot.
9
Confirm that the new module boots and that the online LED is green.
—End—
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Copyright © 2005-2007, Nortel Networks
.