Filter
Top Products
84 Installing Metro Ethernet Routing Switch 8600 modules and connecting equipment
Seating the backplane connectors: 8010co chassis
7
Using a Phillips screwdriver, tighten the 2 captive screws to secure
the module to the chassis ("Securing the module in the chassis:
8003, 8006, and 8010 chassis" (page 85) or "Securing the module
in the chassis: 8010co chassis" (page 85)).
Make sure you securely tighten all captive screws for proper module
operation. This ensures a good connection between the module
and the backplane and prevents apparent module failure of properly
functioning modules.
If a module failure occurs, check for possible backplane connection
problems as a cause. Make sure the module is correctly seated
in the backplane connector and the captive screws are securely
tightened. If the module still fails to operate, contact Nortel customer
support for assistance.
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Copyright © 2005-2007, Nortel Networks
.