Filter
Top Products
Configuring the dialing plan for PSTN access to SRG users in Normal Mode 59
Figure 10
NRS Routing Entries window for selected endpoint
7
Click Add in the Routing Entries window to add a routing entry.
The Add Routing Entry window opens, as shown in Figure 11 "Add
Routing Entry" (page 59).
Figure 11
Add Routing Entry
8
Configure the numbering plan entries for the branch office. This
is usually set to the unique non-dialable number that identifies the
branch office, as configured in the ZDP property of the branch office
zone in LD 117 at the main office (see step 2).
The type of number configured in the NRS should be set to match
the type of number as configured in the main office.
If some calls are to be routed differently from others, it is possible to
provision the multiple Numbering Plan Entries in the NRS to achieve
this.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.