Filter
Top Products
34 Installation
Procedure steps
Step Action
1 Use a Phillips screwdriver to loosen the two screws that fasten
the filler panel to the chassis.
2 Pull the filler panel away from the slot as shown in the following
figure.
--End--
Installing an Ethernet Routing Switch 8003, 8006, or 8010 chassis
into a rack
Install an Ethernet Routing Switch 8003, 8006, or 8010 chassis in a
standard equipment rack (19-inch).
Prerequisites for installing an Ethernet Routing Switch 8003, 8006, or
8010 chassis into a rack
• Remove any filler panels before you install the chassis to decrease the
weight during installation.
Procedure steps
Step Action
1 Hold each rack-mounting bracket to the sides of the chassis, and
align the screw holes.
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 02.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.