Filter
Top Products
66 Configuration
Procedure job aid: Setup Utility prompt descriptions
Prompt Action
Please provide primary
config-file path
[/flash/config.cfg]:
Press Enter to accept the default (/flash/config.cfg),
or enter a different file location for the primary
configuration file. To store the configuration file
on the PCMCIA card, use /pcmcia/config.cfg.
Specifying the path to the file is optional.
Please provide
primary image-file path
[flash/p80a41xx.img]:
Press Enter to accept the default (/flash/p80a4
1xx.img), or enter a different file location for the
primary image file. Specifying the path to the
file is optional. If the runtime image resides on
a PCMCIA card, you must specify the path (for
example /pcmcia/filename).
Please add system
prompt [Ethernet Routing
Switch-8606]:
Press Enter to accept the default (Ethernet Routing
Switch-8606), or enter a different string of up to 20
characters.
Please select CPU
Master slot (5/6) [5]:
Press Enter to accept the default (5), or specify 6
for the master CPU slot.
Master CPU mgmt port:
autonegotiation [n] (y/n)?
Press Enter to accept the default(n), or enter
y to indicate that you want the master CPU
management port to use autonegotiation.
speed (10/100) [10]: Press Enter to accept the default (10 Mbps), or
specify 100 Mbps.
Do you want to enable
automatic savetostandby
mode [n] (y/n)?
Press Enter y if you want the boot and runtime
configuration files to be saved on the backup
CPU.Press Enter to accept the default (n), if you
want the boot and runtime configuration files to be
saved only on the primary CPU.
Do you want to enable
m-mode support [n] (y/n)?
Press Enter y if you want the chassis to run in 128
K or M mode. Press Enter to accept the default
(n), if you want it to run in 32 K mode only.
To run in 128 K mode, the CPU module must be
an 8691 or higher and the switch must have at
least one 8600 module (128 K module).
If you enable m-mode support and you have a
mixed configuration of modules, the E-modules
and classic modules are disabled.
Do you want to enable
enhanced operation mode
support [n] (y/n)?
Enter y if you want to enable enhanced operation
mode. Accept the default (n), if you do not want to
enable enhanced operation mode. If you enable
enhanced operation mode and you have a mixed
configuration of modules, the classic modules (E-
or M-modules) are disabled.
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 02.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.