Filter
Top Products
Nortel Networks 5399 and 8000 Access Switch SNMP MIB Reference
4-2 300861-C Rev. 00
The actCallTable is indexed by the activeCallDeviceType and the
activeCallDeviceNumber. The actCallTable is implemented as a sparse table.
Therefore, data is only returned for active calls. Update older applications to use
the actCallTable.
Active Modem Calls
A further level of granularity is provided for active modem calls. The
actCallAsyTable in the xylo-callmgmt.mib file provides additional statistics
specifically for active modem calls. This table is indexed by the
activeCallDeviceNumber, which in this case is identical to the modem number.
For example, to get the receive baud rate for an active modem call on modem
number 16, use a MIB browser or other SNMP tool to perform a get action on the
following MIB object:
activeCallAsyRxBaudRate.16
Active MP Calls
A further level of granularity is also provided for active MP calls. The
actCallMpTable in the xylo-callmgmt.mib file provides additional statistics
specifically for active MP calls. This is implemented as a sparse table, and is
indexed by the activeCallDeviceNumber.
Port Action Table
The portActionTable provides an SNMP interface to port actions such as resetting
a port on a device type. This table provides information on actions on any
supported port on the system. For more information about this table, refer to the
xylo-callmgmt.mib file.