Filter
Top Products
Nortel Networks 5399 and 8000 Access Switch SNMP MIB Reference
4-4 300861-C Rev. 00
MP Call History Statistics
A further level of granularity is provided for MP call history statistics. The
callHistMpTable in the xylo-callmgmt.mib file provides additional call history
statistics specifically for terminated MP calls. The callHistMpTable is
implemented as a sparse table. The objects in the callHistMpTable are indexed by
the MIB object callHistIndex, which is a unique index assigned to each call in the
order in which it was terminated.
Internet Group Management Protocol (IGMP)
There are two MIB objects: igmpQueueSize and gmpMaxPendingMcast,
available for managing the IGMP queues. These parameters define the maximum
elements that can be allocated to the IGMP processing queue and the maximum
number of multicast messages allowed in the IGMP processing queue. For more
information, see the xylo-anx.mib file.
Modem MIBs
This section describes the three categories of modem MIBs that are in the
xylo-modem.mib file (located in the annex_root/src/snmp directory). All the
tables in this file are indexed by the modem number (1 through number referenced
by the MIB object totalmodems). The individual MIB objects apply to all
modems in the RAC.
Modem Identification
The objects in the mdmIdTable identify the hardware and software revisions of the
modems.
Modem Control
There are two MIB objects in the mdmCtlObjects group (mdmCtlResetAll and
mdmCtlReadConfig) that apply to all modems. They allow you to reset all
modems and read the modem configuration file, respectively. See the MIB object
descriptions in the xylo-modem.mib file for more details.
The objects in the mdmCtlTable reset and set the state of individual modems. See
the MIB object descriptions in the xylo-modem.mib file for more details.