Filter
Top Products
MCS 2-server Sun Fire V100 Solaris Installation and Commissioning Guide
59
Copyright © 2006 Nortel Networks
You will see the following message:
Obtaining IP Addresses for SysMgr/AcctMgr
Failover Operation
Note: If you don't have plan to configure the failover service,
type in the same primary service logical IP address and
primary machine logical IP address or type 0.0.0.0 instead.
17 Enter the <Machine Logical IP Address of the other
MgmtSvr> (in dot-notation format).
Example: 120.120.13.22
18 Enter the <service logical IP address of the
SysMgr> (in dot-notation format).
Example: 120.120.13.22
19 Enter the <service logical IP of the AcctMgr> (in
dot-notation format).
Example: 120.120.13.22
”You have entered the following IP addresses:
Machine Logical IP Address of the other MgmtSvr:
120.120.13.22
Service Logical IP Address of SysMgr:
120.120.13.22
Service Logical IP Address of AcctMgr:
120.120.13.22
20 Is this information correct? (y/n)
If the information is correct, press Y and Enter.
21 You are now configuring the Syslog daemon. Press
Enter to continue.
22 Is this the Redundant Configuration Accounting
Server Machine [Y/N]? Select N.
The system will now reboot and come up requesting that you
insert CD5.
CD4 will eject from the CD-ROM drive when installed.
Application servers (SIP Application Module, IPCM, Web Client
Manager, Provisioning Module)
Approximate time estimate = 15 minutes
ATTENTION
If you are not prompted for CD5, contact support.