Filter
Top Products
7
Contact:
®
NovaTech Process Solutions, LLC
11500 Cronridge Dr., Suite 110
Owings Mills, MD 21117
T: 410.753.8300
Toll Free: 800.253.3842
www.novatechweb.com
Ethernet Bus Interface Module (EBIM)
NovaTech 8000 Series I/O uses the Ethernet Bus Inter-
face Module (EBIM) to provide a high speed Ethernet
data connection to the D/3®. The EBIMs communicate
using a propri-etary protocol over Ethernet at speeds
of 10/100MB to the D/3® PCMs.
NovaTech 8000 Series I/O Support
8000 Series I/O offers a variety of I/O boards and signal
conditioning termination panels suitable for virtually
every standard process sensor and actuator. Details
on signal conditioning termination panels, as well as
their associated I/O function boards, can be obtained
in individual specification sheets. The standard D/3®
configuration supports such I/O signals as:
• Analog Inputs: 4-20 mA, 10-50 mA, 0-10V (program-
mable ranges of 0-50mV, 0-100mV, 0-1V and 0-10V),
100 ohm platinum RTDs, thermocouples
• Analog Outputs: 4-20 mA, 10-50 mA, 0-10V
• Digital and Pulse Inputs:
• Contact Closures +5, +12, +24 and +10 to +32 VDC
• Contact Closures 95 to 130 VAC
• Pulse Train Inputs up to 100 KHz @ +5, +12, +24 VDC
• Pulse Train Inputs up to 50 Hz @ +10 to +32 VDC and
95 to 130 VAC
• Digital and Pulse Outputs:
• DC Output +5, +12, +24, and +5 to +60 VDC
• AC Output 12 to 140 VAC
• Pulse Output 2 msec. to 3.3 sec. @ +5, +12, +24, and
+5 to +60 VDC
• Pulse Output 10 msec. to 11 min. @ +5, +12, +24,
and +5 to +60 VDC
• Pulse Output 2 msec. to 3.3 sec. @ 12 to 140 VAC
• Pulse Output 10 msec. to 11 min. @ 12 to 140 VAC
8000 Series I/O
®
Product Catalog
8000 Series I/O
Copyright © 2007 NovaTech, LLC. All rights reserved. All trademarks
are properties of their respective owners. NovaTech is a registered
trademark of NovaTech, LLC. The information in this literature is
subject to change without notice and is not to be construed as a
warranty. DS_8KIO_0607