Filter
Top Products
|
User’s Guide: English 39
Top of Form (TOF) and Forms Tear-Off
!
If you turn the platen knob when the printer is turned
on, you will cause the Top of Form to mis-align. Always
turn the printer off before turning the platen knob!
!
Your software may print the first line of print above or
below where TOF is set. You may need to adjust the
TOF to meet your software’s needs. Use the procedures
in “Using Your Printer, Top of Form, Forms Tear-Off
Status (ON or OFF).”
The Top of Form and Forms Tear-Off settings of your printer
interact.
How you set the Top of Form depends on the status of the
Forms Tear-Off menu setting.
If Forms Tear-Off is activated (set to ON), set the Top of Form
using Step A.
Refer to “Using Your Printer, Setting Top of Form, Forms
Tear-Off ON (Step A).”
If Forms Tear-Off is NOT activated (set to OFF), set the Top of
Form using Step B.
Refer to “Using Your Printer, Setting Top of Form, Forms
Tear-Off OFF (Step B).”
Forms Tear-Off Status (ON or OFF)
Before you set the Top of Form, you need to know the status
of the Forms Tear-Off menu setting (whether it is ON or OFF).
There are two ways to determine the status of the Forms Tear-
Off menu setting.
• print the Menu.
• use the TEAR key
To print the Menu, refer to “Using Your Printer, Menu Mode,
Print the Menu Settings.”
To use the TEAR key:
1 Load paper.
2 Press TEAR.
3 If the paper moves up, then Forms Tear-off is OFF.
If the paper moves down, then Forms Tear-off is ON.