Filter
Top Products
Getting Started > 25
P
RINTER
SECTION
P
APER
RECOMMENDATIONS
Your MFP will handle a variety of print media, including a range
of paper weights and sizes. This section provides general advice
on choice of media, and explains how to use each type.
The best performance will be obtained when using standard
75~90g/m² paper designed for use in copiers and laser printers.
Suitable types are:
> Arjo Wiggins Conqueror Colour Solutions 90g/m²;
> Colour Copy by Neusiedler.
Use of heavily embossed or very rough textured paper is not
recommended.
Pre-printed stationery can be used, but the ink must not offset
when exposed to the high fuser temperatures used in the printing
process.
Envelopes should be free from twist, curl or other deformations.
They should also be of the rectangular flap type, with glue that
remains intact when subjected to hot roll pressure fusing used in
this type of printer. Window envelopes are not suitable.
Transparencies should be of the type designed for use in copiers
and laser printers. We strongly recommend Oki transparencies
(Order No. 01074101). In particular, avoid office transparencies
designed for use by hand with marker pens. These will melt in the
fuser and cause damage.
Labels should also be of the type recommended for use in copiers
and laser printers, in which the base carrier page is entirely
covered by labels. Other types of label stock may damage the
printer due to the labels peeling off during the printing process.
Suitable types are:
> Avery White Laser Label types 7162, 7664, 7666 (A4), or
5161 (Letter);
Business cards recommended are produced by Oki (Order
No. 09002985).