Filter
Top Products
Operation > 68
S
CAN
TO
USB M
EMORY
1. Select Scan and from the drop down menu select the
USB Memory option.
2. Enter a file name using the Ten Key pad.
Up to 64 characters (Single byte character) can be
entered.
If Scan to Memory is executed without a file name being
entered, the default file name added in Scanner Menu >
Scan to USB Memory > Default File Name in Menu Mode is
used.
If no file name is entered and you have not specified your
own Default File Name, the file name used by the machine
default is "Image."
If the name of the file to be written in USB Memory is the
same as files already existing in the memory, three options
appear on the screen.
You are asked whether you wish to Save File?
OK
The file will replace the one that already exists (limited
to one file).
Rename
Enables you to rename the file.
Cancel
This cancels file writing.
When scanning multiple documents from the ADF, or on
the Flatbed from Job Build Scanning with File Format set to
Jpeg, the image file is divided by page and saved. The file
name is "file name entered-###," with ### being a
number between 000 and 999 automatically allocated to
each page.
3. Set Density and Media size.
NOTE:
This option is only available if USB Memory is plugged into the
USB port on the front of the machine.