Filter
Top Products
Network Configuration 15
TCP/IP Tab
This allows you to configure TCP/IP related items.
Netware Tab
This is where you can configure NetWare related items.
Location Comments
Use TCP/IP
Protocol
Set TCP/IP protocol as enabled/disabled.
Use DHCP/
BOOTP
Check this item if IP address, subnet mask, default gateway and IP
addresses for DNS primary server and secondary servers are retrieved
from the DHCP or BOOTP server. Otherwise, uncheck.
Use RARP Check this item if IP address is retrieved from the RARP server.
Otherwise, uncheck.
IP Address Set the IP address of the selected network interface card.
Subnet Mask Set the subnet mask of the selected network interface card.
Default Gateway Set the default gateway of the selected network interface card.
Use FTP/LPD
Banner
Check this item if you want to add the FTP/LPD banner. Otherwise,
uncheck.
DNS Server . . . Set IP addresses for DNS primary and secondary servers.
Network PnP
Setup ...
Configure items related to Network PnP.
In this dialogue box, the following items can be configured>
Auto IP address Set to get IP address
dynamically by Auto IP,
enabled or disabled
Use Network PnP Set notifying users with
using UPnP supported OS
of the printer, enabled or
disabled
Device Name Set the device name for
Network PnP
Location Comments
Use NetWare Protocol Set NetWare protocol as enabled/disabled.
Use IPX Protocol / Use TCP/IP
Protocol
Set protocol to use.