Filter
Top Products
UNIX 87
5. Add the print queue using the smit command.
a. Activate the smit command and convert to the item [Add print
queue].
# smit mkrque
b. Select [remote] (the printer connected to the remote host) from
[Type of connection].
c. Select [Standard procedure] from Type of remote print.
d. Carry out the following settings in [Add a standard remote print
queue]. If the configuration differs from below, configure
according to environment.
Example: Use port lp with print queue c7300v2_lp and print server
c7300v2
Queue to be added “c7300v2_lp”
Host name of the remote server “c7300v2”
Queue name of the remote server “lp”
Type of print spooler
of the remote server “BSD”
Description of printer name
of the remote server “Optional comment”
LPD Printing
Line Printer Daemon (LPD) is the most common protocol for printing with
TCP/IP to a network printer. Refer to the workstation’s manual for details
of lpr and lp commands. The following explanation in this section uses the
printing of print file test.prn with printer name c7300v2_lp as an example.
Logical printers
The printer’s network interface includes three logical printers.
> lp must be used for printing a file created using the printer driver.
> sjis must be used for printing a text file of Shift JIS Kanji code.
> euc must be used for the printing a text file of the EUC Kanji code.
Logical printer Printer function
lp For direct output
sjis For Shift JIS Kanji converted output
euc For EUC Kanji converted output